Perhaps the simplest step of the process is attaching the mounting plate to the TV. In the mounting kit, you'll typically find the mounting plate is attached to the mount. So, remove the mounting plate before proceeding.
Mounting plates attach to the back of the TV with four screws. They use the VESA standard, with reinforced screw holes on the back of the TV or monitor.
Securely screw the mount to the TV according to your TV mounting kit's instructions. Be sure to get the orientation right - fitting the mount upside down is easy, but will result in the TV being mounted the wrong way up!
Some TV mounts come with a printed "map" to pin on your wall and mark out the drill holes. If this isn't included, hold the mount to the wall and with a pencil mark the holes you will be using. Next, choose a suitable drill bit and set the correct depth, then drill the marked holes.
Usually, hex cap screws are used for this, particularly with mounts designed for larger TVs. However, you might have a kit that includes standard screws or those with a hex key (Allen key).
This is the good part. Life the TV – get help for large screens or heavier displays – and attach it to the mount as per the kit instructions.
Typically, this will involve "hooking" the mounting plate onto the mount. For widescreen TVs that require two people to install, both will need to identify the hooks and lower the TV into place. If it's a smaller TV or computer monitor, you should be able to hook it on with ease without assistance.
The last part of mounting a TV on the wall is to ensure the cables are tidy. Most kits for hanging a TV on the wall will include some method of cable management. Check for plastic cable ties, or strips of hook-and-loop fasteners, which can be used to wrap the cables to the TV mount and help with routing.
As noted earlier, subducting strips are also a good idea, but if you've planned to remove some of the wall/plaster or drill a hole for cable routing, now is the time to thread the cables through.
You’ve recently found a new TV that’s perfect for your home and have now arrived at a new complication: how will you set it up so it ties the whole room together while still allowing for optimal viewing? The best TV wall mounts are more than just secure; they also ensure that TV watching is both comfortable and enjoyable. But choosing the right mount requires more thought than just finding one that will support the size of your television. You’ll also have to consider how and where you’ll be watching television before deciding on the right TV wall mounting solution.
There are four main types of TV wall mounts: fixed, tilting, full motion and ceiling mounted. We’ll explore each of these TV mounting options and the benefits that they offer.
A fixed TV wall mount will not offer any movement, meaning you won’t be able to easily change the position of your television once the mount has been installed to the wall. Their thin size means that your television will look as if it is directly embedded in the wall rather than attached to a mount. Considering their sleek appearance that can suit any room layout, it’s little wonder that fixed TV wall mounts are one of the most popular options.
As fixed TV mounts cannot be moved following installation, it’s crucial that you take the time to determine the perfect height for television viewing before taking out the power drill. Here are our best tips for finding the right spot for your fixed TV wall mount:
If you are planning to mount the TV above cabinets or shelves, leave 4 to 6 inches of empty space between the wall mount and the object beneath it.
As suggested by the name, a tilting TV wall mount provides you with more control over movement in comparison to a fixed mount. Tilt mounts are virtually hidden, so they won’t interfere with the design of your room. Despite their slim appearance, they can be tilted forwards or backwards by several degrees. Their ability to tilt serves two main purposes:
Do you find yourself watching your TV from across the room more often than not? If you have multiple seating areas or an open plan living room where you can watch television while cooking in the kitchen, then a full motion TV wall mount could be the solution you’re looking for.
With a full motion TV wall mount, you’ll enjoy almost complete control over your television’s position by seamlessly tilting, extending and swivelling the mount. Full motion TV mounts achieve a floating TV effect and are also a popular option for people wanting to mount their TV in the corner of a room.
The versatility of a full motion TV wall mount offers optimal viewing and can remove the problem of screen glare altogether. While their appearance isn’t as subtle as fixed mounts, you can easily press your bracket back against the wall once you’ve finished watching TV to achieve a low-key look.
Ceiling mounted TV mounts are a fourth option that’s often not spoken about as commonly as the others. This type of TV mount drops down from the ceiling and can be installed at various heights. They are often found in home cinemas, offices, hotels, universities and conference rooms.
TV RepairCeiling mounted TV mounts offer maximum visibility while also allowing you to make full use of your wall and floor space. With 360 degree rotation and full control of tilt, installing a ceiling mount means that you will be able to easily redesign your room’s layout in the future without reinstalling your television.
If you’ve come across this guide, we’re assuming that you’re looking to mount your TV on the walls of your home by yourself. We see that you’re also quite the hands-on type, wanting to DIY this yourself, and that in itself is admirable so hats off to you. We’re not going to lie, it’s not as easy as it seems: drilling a few holes, screwing in the wall mount, hanging your TV on it. However, with our guide we’re going to make it seem as if you have a professional right beside you guiding you through step by step. Here’s what you have to do:
There are a variety of TV Mounts to choose from. From fixed mounts to tilting mounts to ceiling mounts, there mounts for every possible scenario you can think of.
Choosing which wall you want to mount your TV on is imperative because it sets the mood for the whole room. Normally you’d want a TV in the living room because that’s where all the relaxing happens. But sometimes people want TVs in the most unexpected of places. The bathroom, for one because who knows you might get bored while taking a bath. It’s also important because sometimes the walls might not have studs behind them, and no matter what if you’re mounting TVs you’ve got to have studs.
Speaking of studs, what are said ‘studs’ and what purpose do they serve? A wall stud is a fundamental building block in a house’s frame building. Putting this into Singapore context, most of the time we’d easily be able to find wall studs, but sometimes we find that the walls that we want are drywalls instead. In order to counter this, we suggest adding in reinforcements before you actually put up the TV. You can still drill into the dry wall and add your TV wall mount but end of the day, it’s better to be safe than sorry. After locating the studs in the wall that you’ve chosen do remember to mark the TV dimensions so you have a rough gauge of where the TV will be at once it’s been mounted.
At this point, we can take our TV wall mount and position it where we’ve demarcated the area for our TV. Remember to use a spirit level and make sure that it is completely plane. The easiest way to do this would be getting someone else to help you measure how straight your monitor is. Mark where your holes are going to be for the wall mount. As an added precaution do remember to check it twice! 2 markings and 1 hole is a lot better than 1 marking and 2 holes.
Now that we’re done with all the prep work, here comes the moment we’ve all been waiting for. It’s time to get that TV wall mount up on that wall! Start by drilling pilot holes (holes that’ll indicate where you have to drill for the main holes) into the studs where you’ve made the marks. Get someone to help you with holding the mount against the wall where the pilot holes are at and begin drilling the screws in. A pro tip would be to NOT drill screws fully, instead stopping halfway to check if the mount is still level because vibrations do tend to cause vibrations, which may off-balance the mount. Re-position and continue drilling all the way in.
Now we move on to the other side, where we attach the mounting plate to the back of your TV. Be careful not to accidentally screw it in too tight! Just nice would be fine. Do a final check on both the wall and the TV and you’re almost there!
Not all brackets are mountable on concrete or brick, and only some will include the appropriate hardware. You may need to order additional materials from the manufacturer or purchase some supplies from your local hardware store, such as concrete wall anchors. Be sure to follow the instructions in the owner's manual, which you can read on our site.
If you can’t avoid glare, get a tilting wall mount or a full-motion (aka articulating) mount. Small viewing angle adjustments can deflect the glare away from your field of view.
Part of what makes a wall-mounted TV so appealing is the neat, uncluttered look. There are a number of ways to conceal your power and A/V cables — from quick and simple cover-ups to more labor-intensive in-wall options.
It's a good idea to figure out how you'd like to manage your wires before deciding where to mount your TV, since some locations will be more install-friendly than others.
In the video, we use a power relocation kit. If you'd like to run your wires on the outside of your wall, you can use paintable cable raceways to hide your TV's A/V and power cables.
Do you have a choice of walls on which to mount your TV? Or is your TV location predetermined by your only feasible furniture arrangement or the location of the cable TV outlet?
If you have a choice, then look at how sunlight enters the room during the hours you’re most likely to watch TV. Try to avoid mounting your TV on a wall that is hit by a lot of direct sunlight or by glare from nearby windows or light fixtures.
If you have to mount your TV on an exterior wall, it won’t be easy to hide the cables inside the wall. That’s because exterior walls have extra bracing and insulation.
